EPOX nVIDIA nForce3 250Gb Manuel d'utilisateur télécharger pdf (Page 32)

Installation

Page 3-16

3-9 CPU Overheating Protection

This mainboard is equipped with CPU Overheating Protection. It will automati-

cally remove power to shutdown the system when CPU temperature reaches

approximately 110°C. This is to prevent long term damage to the CPU from

overheating. This protection is designed through hardware and no BIOS setup

is required.

To power on your system again,

Step 1: Unplug the ATX power cord (or turn off the ATX power supply

switch)

Step 2: Wait a few minutes for the CPU to cool.

Step 3: Check that the CPU heatsink and cooling fan assembly is properly

installed. Be careful when touching the heatsink as it may be hot.

Step 4: Plug back the ATX power cord (or turn on the ATX power supply

switch) and power -on the system.

If the beeping sound persists, repeat Step 1 to remove the power source.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 77 78

Pas de commentaire

EPOX nVIDIA nForce3 250Gb Manuel d'utilisateur Page 32